FAQ

Please contact us at equipementsturdy@gmail.com if you cannot find an answer to your question.
If you have other questions, please just send it to equipementsturdy@gmail.com .

Frequently asked questions

The maximum height recommended by the manufacturer is 50 feet

Most of our aluminum walkways have a maximum load of 500 lbs

The weight varies depending on the size of the gateway. We have several sizes available.
20 in x 20 ft = 99 lbs
20 in x 24 ft = 119 lbs
20 in x 32 ft = 169 lbs

A pump-jack system works using a crank-operated lifting mechanism. The posts are attached to the building structure, then the platforms are installed on the posts. By operating the crank, the platforms are raised or lowered, allowing workers to reach different heights safely.

When using pump-jack systems, it is essential to follow the safety standards of the CNESST (Commission for Standards, Equity, Health and Safety at Work) and OSHA ( Occupational Safety and Health Administration). This includes regular inspections, worker training, use of fall protection devices, and following manufacturer's instructions. You can find out more about CNESST regulations by visiting our Blog: CNESST Regulations.

With a little practice, it is entirely possible to install a pump-jack system alone, even two stories high. One of the major advantages of pump-jack systems is that all materials rise at the same time as the system. So, even for a person working alone, this system is much quicker to assemble with materials than traditional scaffolding. However, it is still important to follow safety standards and manufacturer recommendations to ensure safe use.

Yes, it is strongly recommended that you install a safety harness when using a pump-jack system, particularly if you are working at a significant height. A safety harness provides additional protection against falls and is an essential safety measure.

Can't find what you're looking for? Contact us